@xDeleterious69 NO, the suspension is total garbage.

How this incompetent junk gets 5 stars beyond still photos and not driving it is a mystery to me. People just blindly rate with zero attention to detail, and as if a nearly identical buggy design they already have and don't have to install (Nagasaki Outlaw) which works far better doesn't already exist.

STILL as of 2.5:
Looks nice until you start driving it... the shocks seem welded to the knuckles and swing arms, don't compress or pivot and their tops even poke through the body area in the front.
The triangular control arm pairs that go to the front wheel knuckles don't sway independently or even pivot at all, they just raise up and down equally as if they're welded to the wheels with no joint to the body, and as if the wheels have a straight axle between them.
When ramping in the air or otherwise decompressing suspension, you can even see the control arms go below the chassis (the area on the arms where they should be connected to the chassis falls below the chassis as if they broke off, and only in fixed connection to the wheel knuckles). Look at screenshot #3, shows what I'm referring to.
In the rear you'll see the stabilizer rods that should sway up and down are completely fixed, connected to the hub plate in the center, and the hub moves up and down (even below the chassis, again when ramping) as if it's also connected to nothing on the chassis which looks ridiculous.
Don't take my word for it, look at the videos. The only plausible looking part are the swing arms (the large metal beams that go from the rear wheels to the chassis), but you can even see the fronts of those sink below the chassis as well when ramping.

No realistic, let alone independent suspension whatsoever. Needs fixed asap, since it drives more like a traditional truck with straight axles than a buggy. Sort of the whole point of this vehicle. Not to mention the tires look like they're made of glossy plastic.

For anyone clueless of how the suspension should work, take a look at the Nagasaki Outlaw for a direct comparison, it's basically the same vehicle. Or the RC bandito to clearly see how it's suspension is independent.

I'm not saying it's easy to make it all work correctly but it shouldn't be bothered with until someone knows what they're doing and not just importing some 3d models they bought/found somewhere and making the colors work.

My Handling:

<?xml version="1.0" encoding="UTF-8"?>

<CHandlingDataMgr>
<HandlingData>
<Item type="CHandlingData">
<handlingName>canamx3</handlingName>
<fMass value="2400.000000" />
<fInitialDragCoeff value="4.000000" />
<fPercentSubmerged value="85.000000" />
<vecCentreOfMassOffset x="0.000000" y="0.050000" z="-0.000000" />
<vecInertiaMultiplier x="2.000000" y="2.000000" z="2.900000" />
<fDriveBiasFront value="0.350000" />
<nInitialDriveGears value="6" />
<fInitialDriveForce value="0.365000" />
<fDriveInertia value="1.000000" />
<fClutchChangeRateScaleUpShift value="1.800000" />
<fClutchChangeRateScaleDownShift value="1.800000" />
<fInitialDriveMaxFlatVel value="150.000000" />
<fBrakeForce value="0.500000" />
<fBrakeBiasFront value="0.650000" />
<fHandBrakeForce value="0.450000" />
<fSteeringLock value="40.000000" />
<fTractionCurveMax value="1.700000" />
<fTractionCurveMin value="1.500000" />
<fTractionCurveLateral value="16.500000" />
<fTractionSpringDeltaMax value="0.130000" />
<fLowSpeedTractionLossMult value="1.400000" />
<fCamberStiffnesss value="0.000000" />
<fTractionBiasFront value="0.504000" />
<fTractionLossMult value="0.200000" />
<fSuspensionForce value="1.400000" />
<fSuspensionCompDamp value="0.900000" />
<fSuspensionReboundDamp value="0.600000" />
<fSuspensionUpperLimit value="0.190000" />
<fSuspensionLowerLimit value="-0.200000" />
<fSuspensionRaise value="0.020000" />
<fSuspensionBiasFront value="0.550000" />
<fAntiRollBarForce value="0.000000" />
<fAntiRollBarBiasFront value="0.000000" />
<fRollCentreHeightFront value="0.500000" />
<fRollCentreHeightRear value="0.430000" />
<fCollisionDamageMult value="1.700000" />
<fWeaponDamageMult value="1.000000" />
<fDeformationDamageMult value="1.500000" />
<fEngineDamageMult value="1.500000" />
<fPetrolTankVolume value="100.000000" />
<fOilVolume value="8.000000" />
<fSeatOffsetDistX value="0.000000" />
<fSeatOffsetDistY value="0.000000" />
<fSeatOffsetDistZ value="0.000000" />
<nMonetaryValue value="50000" />
<strModelFlags>220010</strModelFlags>
<strHandlingFlags>420000</strHandlingFlags>
<strDamageFlags>0</strDamageFlags>
<AIHandling>AVERAGE</AIHandling>
<SubHandlingData>
<Item type="NULL" />
<Item type="NULL" />
<Item type="NULL" />
</SubHandlingData>
</Item>
</HandlingData>
</CHandlingDataMgr>